This snaker is a unique tool tapering any tube caliber by setting a few pleats. Most times just for 2 3/4" pleats make
an accurate fitting.
High stability of the joint tubes gained by a large supporting surface is the big advantage of this tool.
91020000
jawdepth 2 3/4"
length / width: 13,58" / 2,76"
1,76 lb
Tinedge-jaws 104 BKZ
Upright beads at double seam roofing are built effortless
with the Tinedge-jaws.
Toolwidth is 19 3/4" and jawdepth selectable from 3/4" to 2 1/3". The upright bead is built into steps.
First erect lip by 45° at it´s full length, then bent it up to 90°.
91010000
tongdepth 2 1/3"
length / width: 24,8" / 19,69"
15,43 lb
Sheetbending-jaws 101 BG 1010
Without difficulty leakproof and weldless gutters, ducts,
high wallsheating, wallconnections etc. are constructed
at the jobsite, unlimited working length.
Durable baked epoxy finish
91030000
jawdepth: 31 1/2" tool depth: 4 1/3"
length / width: 9,06" / 8,66"
1,88 lb
Sheetbending-jaws 102BG 500
Used like no. 91030000.
Durable baked epoxy finish
This tool makes a manual accurate lock-seam just
by spreading the levers. Dosed application of weight
onto the implement relieves strain from the arms.
Cost saving of the twinseam-folder is without competition working small roof-areas and corner-constructions.
The implement is in dependent of any current source.
Its application starts at a 11/2"-2"seam height.
Durable baked epoxy finish
91060000
toolwidth: 8 2/3"
length / width: 33 1/2" / 6 1/3"
13,89 lb
Eaves edger 105 TK
Toolwidth of 10" allows quick and accurate sheet metal
shaping constructing eaves, gutters, dormer windows etc.,
if needed a spacer can be put on at the eccentic pivot to
create edges in excess of 90ø as for high lips and waterbeads
at inner eaves.
Durable baked epoxy finish
91070000
clawdepth: 1 1/2", length: 9 1/2"
length / width: 9,84" / 10,24"
3,75 lb
Eaves closing jaws 106 TSCA
The jaw width of 8 3/4" enables quick
and accurate folding of eaves sheet.
